Supply HYDAC  Press Filter Elements

Combined Betamicron Aquamicron Filter Elements  0660 R 010 BN/AM / -- V	Combined Betamicron Aquamicron Filter ElementsThe presence of water in hydraulic media causes manyproblems, for example, the saturation of very fine filters or thejamming of valves, and these problems are often wrongly attributed to excessive levels ofsolid particle contamination. In addition to this the build--up of rust and the reduction in lubrication on bearings and slidescan lead to considerable impairment of the functioning of a system. In other words, along with solid particles, water is a serious “contaminant” of hydraulic media. 0660 R 010 BN/AM / -- V
Hydac  Filter Elements 94908357,  5622624	HYDAC Filter Elements safeguard the performance and service life of essential and expensive hydraulic components due to their high standard of quality Disposable Betamicron element based on inorganic fibre with patented seam shaping (European patent no94908357, US patent no 5622624)

Wire Mesh Element
  Corrosion protection due to stainless steel flter material and   • 
tin-plated or nickel-plated steel parts
  Cleanable • 
  Filtration ratings: 25µm, 50µm, 74µm, 100µm, 149µm, and  • 
200µm nominal
Metal Fiber Element
  Safeguards high fltration effciency even at extreme dynamic  • 
loads
  High contamination retention capacity due to deep fltering which  • 
results in a longer service life
Low fow resistance • 
  Corrosion protection due to stainless steel flter material and   • 
tin-plated steel parts
  High differential pressure tolerance • 
  Economical due to cleanability • 
  High temperature range • 
  Filtration ratings: 3µm, 5µm, 10µm, and 20µm nominal / or  • 
absolute ratings - Consult Factory
Disposable Polyester (paper) Element
  Higher contamination retention capacity then cellulose   • 
due to deep fltration
Low fow resistance • 
  Media supported on both sides with wire mesh • 
  Good fuid compatability due to media being free of bonding  • 
agent
  Filtration ratings: 10µm, and 20µm nominal • 
  Non cellulose media  •  (polyester)- plastic coating eliminates
swelling

Mobilemicron Element
  Extremely low  •  ∆P across elements when utilized with high viscosity
fuids or cold start conditions
Melt blown fberglass media construction • 
  Good dirt holding capacity • 
  High fltration effciencies ß • 
x(c)
 ≥ 200
  Good beta stability • 
Filtration Ratings: 10µm and 15µm absolute • 

1 Conductive plastics end caps
2 Seam support tube
3 Inner screen to stabilize deep pleats
4 Support layer to back up active media layers
5 Final active depth layer to remove fne particles
6 Pre-flter depth layer to remove course articles
7 Diffusion layer to equalize fow across surface
8 Outer screen to stabilize pleats (under cover)
9 Multi-Protection cover (for high pressure elements)

0500R020BN3HC     0500R020BNHC     0660D010BH     0660D010BH3HC
0660D010BHHC      0660D010BHHCW   0660D010BN    0660D010BN3HC
0660D010BNHC      0660D010BNHCW   0660R010BN     0660R010BN3HC
0660R010BNHC      0850R005BNHC       0850R010BN3HC  0850R010BNHC
0950R010BN3HC    0950R010BNHC       10308R12BN    10316R06BN
10608D12BN          10616D12BN           10616D25BN

H960016012BN    H960108003BH     H960113017BH    H960113020BH
H9650 08005 BN  H9650 16010 BN   H9650 16020 BN  H9800 04003 BN
H9800 04012 BN  H9800 04025 BN   H9800 08003 BN   H9800 08006 BN
H9800 08012 BN  H9800 40020 BN   H9800 4003 BN    H9800 4010 BN
H9800 4020 BN    H9800 4025 BN     H9800 8010 BN    H9800 8012 BN
H9800 8025 BN    H9801 04010 BH    H9801 04017 BH  H9801 08017 BH